Order Products : sales@su-jiao.com
Adiprene® L 700
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Chemtura |
| Trademark: | Adiprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5bwz7H_Adiprene-L-700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADIPRENE L 700 is a TDI polyether-based liquid urethane prepolymer which is readily processable by conventional hand and machine mixing techniques. ADIPRENE L 700 produces high quality elastomers in the 90-94 A durometer (42-46 D durometer) hardness range when cured with 4,4'-methylene-bis (2-chloroaniline) or Chemtura's CAYTUR® 21 urethane curative. These tough, highly resilient elastomers have many unique features:
These properties suggest the use of ADIPRENE L 700 in applications such as wheels, rolls, or spraying. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 92 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 9.65 | MPa | |
| 300% Strain | 21.4 | MPa | |
| Tensile Strength | 37.2 | MPa | ASTM D412 |
| Tear Strength (Split) | 19 | kN/m | ASTM D470 |
| Compression Set (70°C, 22 hr) | 31 | % | ASTM D395B |
| Bayshore Resilience | 40 | % | ASTM D2632 |
| Clash-Berg Modulus | ASTM D1043 | ||
| -57°C | 296 | MPa | |
| -40°C | 117 | MPa | |
| -18°C | 40.7 | MPa | |
| 24°C | 26.2 | MPa |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 17 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life | 3.0 | min | |
| Post Cure Time (70°C) | 16 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Abrasion Index - NBS | 230 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time (100°C) | 1.0 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 GR13 NL100 MB | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| SureSpec IP-350 | Genesis Polymers | PP Impact Copolymer | SureSpec |
| Ferro PP LPP40BA02NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| GECET™ F-100 | Fagerdala USA Inc. | PS (EPS) | GECET™ |
| LNP™ VERTON™ RV00AES compound | SABIC Innovative Plastics | Nylon 66 | LNP™ VERTON™ |
