Order Products : sales@su-jiao.com
Osterlene® PPH-18-.5
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5bBYCO_Osterlene-PPH-18--5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PPH-18-.5 is a fiber filament polypropylene homopolymer that is UV resistant. Typical applications include BCF Multi-Filaments and Continuous Filament Yarn. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 104 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.2 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 9.0 | % | ASTM D638 |
| Flexural Modulus | 1340 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 27 | J/m | ASTM D256A |
| Additional Information |
|---|
| Tenacity of Fibers, ASTM D2256: 2.9 g/denierElogation of Fibers, ASTM D2256: 93%Suggested Takeup Roll Speed (suppliers opinion): 6562 ft/min, 2000m/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® M black AST | Röchling Engineering Plastics SE & Co. KG | UHMWPE | POLYSTONE® |
| Wellamid® GF33-66 XE-N1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| ADEKA PR series | Adeka Corporation | PUR-Ether | ADEKA |
| Exelene® PS 6900 | Montachem International, Inc. | PS (GPPS) | Exelene® PS |
| Softell TKG 300N 1 NAT | LyondellBasell Industries | PP Copolymer | Softell |
