Order Products : sales@su-jiao.com

NuSil CV1-2964

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5XUNOK_NuSil-CV1-2964.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.0 W /m-K, Primed Lap Shear 120 psi (0.8 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 1.0 W /m-K, Primed Lap Shear 120 psi (0.8 MPa)

General Information
Features	Low to No Outgassing Thermally Conductive
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity	1.0	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Tack Free Time	13.0	hr

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	White
Density	2.33	g/cm³
Viscosity	52	Pa·s
Curing Time (150°C)	0.25	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	65
Lap Shear Strength ¹	0.827	MPa
Tensile Strength	1.24	MPa
Tensile Elongation at Break	50	%

Note Message
1 .	Primed with SP-270

Resin Grade	Manufacturer	Category	Trademark
Novodur® E309	Styrolution	ABS	Novodur®
DINALON® B1S25 HI	Grupo Repol	Nylon 6	DINALON®
DOMAMID® CP7	DOMO Engineering Plastics SPA	Nylon 6	DOMAMID®
LOXIM 830 02C HB	LOXIM Industries Private Limited	PP, Unspecified	LOXIM
Polimid A EM4	Poliblend S.p.a.	Nylon 66	Polimid A