Order Products : sales@su-jiao.com
Generic PP Alloy - Mineral
| Category: | PP Alloy , Polypropylene Alloy |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5WNFW7_Generic-PP-Alloy---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Alloy - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.980 to 1.05 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 to 35 | g/10 min | ISO 1133 |
| Molding Shrinkage (23°C) | 0.40 to 0.92 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 15.0 to 18.3 | MPa | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 24 to 52 | kJ/m² | ISO 179 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ TFM™ Modified PTFE TFM 1635 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE |
| DynaMix™ 4144-35GF | Polymer Dynamix | PPA | DynaMix™ |
| Trilliant™ HC HC3610-0001 HI Natural | PolyOne Corporation | PC+PBT | Trilliant™ HC |
| Arnitel® ID 2045 | DSM Engineering Plastics | TPE | Arnitel® |
| XYLEX™ X7300CL resin | SABIC Innovative Plastics | PC+Polyester | XYLEX™ |
