Order Products : sales@su-jiao.com
AZDEL™ SM10380
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Azdel, Inc. |
| Trademark: | AZDEL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5U5gCd_AZDEL-SM10380.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AZDEL SM10380 is a glass mat thermoplastic laminate based upon random oriented continuous fiber mat contained within polypropylene resin matrix. This composite material features high flow properties and a very homogeneous fiber distribution. This material is typically used for standard semi-structural applications and where high impact and stiffness are desired, and is usually used in sheet form (un-molded) in applications such as large-truck trailer scuff liners. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5140 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 79.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.6 | % | ISO 527-2 |
| Flexural Modulus | 5140 | MPa | ISO 178 |
| Flexural Stress | 140 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact (4.00 mm, Total Energy) | 23.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 154 | °C | ASTM D648 |
| CLTE - Flow (-40 to 121°C) | 2.3E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 5.3 | mm/min | ISO 3795 |
| Additional Information |
|---|
| Basis Weight, Internal Test Method: 0.67 lbs/ft²Filler Content by Weight(ashing), Internal Test Method: 38 %Notched Izod Impact, ISO 180, 23°C, 4mm: 771 J/mSheet Thickness, Internal Test Method: 108 milsSpecific Gravity, ASTM D792, Laminated: 1.17 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Wire & Cable GA-1057H1-VW1LF | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Wire & Cable |
| Sarlink® TPV 4785B40 | Teknor Apex Company | TPV | Sarlink® TPV |
| NuSil MED-4920 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| INEOS PP H05H-01 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| Mafill® CR CE 8044 | Ravago Group | PP Copolymer | Mafill® |
