Order Products : sales@su-jiao.com
WELLAMID Nylon 6600/42 HWCP
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | CP-Polymer-Technik GmbH & Co. KG |
| Trademark: | WELLAMID Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5Rng76_WELLAMID-Nylon-6600-42-HWCP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WELLAMID Nylon 6600/42 HWCP is a Polyamide 66 (Nylon 66) material. It is available in Europe. Important attributes of WELLAMID Nylon 6600/42 HWCP are:
Typical application of WELLAMID Nylon 6600/42 HWCP: Automotive |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.11 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow : 4.00 mm | 0.80 to 1.2 | -- | % | |
| Flow : 4.00 mm | 0.80 to 1.2 | -- | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 2.5 to 3.0 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2500 | 1100 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 70.0 | 45.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | |||
| Yield | 6.0 | 25 | % | |
| Break | 25 | > 50 | % | |
| Flexural Modulus | 2100 | -- | MPa | DIN 52457 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 10 | 25 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | No Break | No Break | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 150 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | 200 | -- | °C | ISO 306/B50 |
| Melting Temperature | 255 | -- | °C | |
| CLTE - Flow (23 to 80°C) | 9.0E-5 | -- | cm/cm/°C | DIN 53752 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength | 30 | 30 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 3.40 | 5.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.015 | 0.070 | IEC 60250 | |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.60 mm | HB | -- | ||
| 3.20 mm | HB | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 260 to 280 | °C | |
| Mold Temperature | 50.0 to 92.0 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mecoline I RDX 5233 | Melos GmbH | TP, Unspecified | Mecoline |
| DILAMID® 6 FV BLACK 2072/2 | Dilaplast S.p.A. | Nylon 6 | DILAMID® |
| Elastamax™ HTE 3070 | PolyOne Corporation | PVC+NBR | Elastamax™ |
| LNP™ COLORCOMP™ J1000AE compound | SABIC Innovative Plastics | PESU | LNP™ COLORCOMP™ |
| Plexiglas® Hi-Gloss NTA-3 | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
