Order Products : sales@su-jiao.com
Quadrant EPP Acetron® GP Acetal
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5PpiXg_Quadrant-EPP-Acetron-GP-Acetal.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Acetron GP is Quadrant EPP's general purpose acetal and is the only porosity-free acetal product available today. Investments in process technology by Quadrant EPP now provide the performance and machinability of acetal without center core porosity. Our in-line photometric quality procedure assures every plate and rod is porosity-free as measured by Quadrant EPP's quick check dye penetrant test. For details of test methods, contact Quadrant EPP. Acetron GP natural is FDA, USDA, NSF, Canada AG and 3A-Dairy compliant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.20 | % | |
| Saturation | 0.90 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 88 | ||
| R-Scale | 120 | ||
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2760 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 65.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 30 | % | ASTM D638 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 82.7 | MPa | ASTM D790 |
| Compressive Modulus | 2760 | MPa | ASTM D695 |
| Compressive Strength (10% Strain) | 103 | MPa | ASTM D695 |
| Shear Strength | 55.2 | MPa | ASTM D732 |
| Coefficient of Friction (vs. Steel - Static) | 0.25 | Internal Method | |
| Wear Factor | 400 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 104 | °C | ASTM D648 |
| Maximum Use Temperature - Long Term, Air | 82 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Limiting Pressure Velocity 1 | 0.0946 | MPa·m/s | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Crystallization Temperature (DSC) | 168 | °C | ASTM D3418 |
| CLTE - Flow 2(-40 to 149°C) | 9.7E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.23 | W/m/K | ASTM F433 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 3 | > 1.0E+13 | ohms | Internal Method |
| Dielectric Strength 4 | 17 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 3.80 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 5.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 4:1 safety factor |
| 2 . | 68°F |
| 3 . | EOS/ESD S11.11 |
| 4 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Menzolit® BMC 1650 | Menzolit Ltd (UK) | Polyester, TS | Menzolit® |
| SLOVAMID® 66 GF 33 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Wellamid® 42LH-NBK1 | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| BioCeres® BC-LBE01 | FuturaMat | Biodeg Polymers | BioCeres® |
| Sumiliteresin® PR-50731 | SBHPP | Phenolic | Sumiliteresin® |
