Order Products : sales@su-jiao.com
Trademark PE HLP9947
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Trademark Plastics Corporation |
| Trademark: | Trademark PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5Pb8m7_Trademark-PE-HLP9947.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Trademark PE HLP9947 is a High Density Polyethylene product. It can be processed by pipe extrusion and is available in North America. Applications of Trademark PE HLP9947 include plumbing/piping/potable water and mining applications. Primary characteristic: high strength. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 24.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 700 | % | ASTM D638 |
| Flexural Modulus | 831 | MPa | ASTM D790 |
| Hydrostatic Design Basis | ASTM D2837 | ||
| 23°C | 11.0 | MPa | |
| 60°C | 6.89 | MPa |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| PENT - Slow Crack Growth | > 500 | hr | ASTM F1473 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NBX0 HF75 NL | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| Tislamid® PA6 PA6 15 MNF FR | Tisan | Nylon 6 | Tislamid® PA6 |
| Dryflex® 662750S | ELASTO | SEBS | Dryflex® |
| GPPC ABS D-1000S | GPPC Chemical Co., Ltd. | ABS | GPPC ABS |
| ICORENE® 9033 BA8 | ICO Polymers SA, A Division of A. Schulman | PE, Unspecified | ICORENE® |
