Order Products : sales@su-jiao.com

Extreme™ D

Category:	TPO , Compounded Polypropylene
Manufacturer:	Spartech Plastics
Trademark:	Extreme™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5MWeMC_Extreme-D.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extreme™ D is a high performance polyolefin sheet which has been enhanced with a decorative pattern. For those OEM's looking for design flexibility and a desire to differentiate their product with a camouflages, wood grains, marble, stone, graphite look, or custom solid colors Extreme™ D is the most cost effective product in the marketplace for large part thermoforming applications. Extreme™ D is a replacement option for painted surfaces or can act as an adhesion layer for painting TPO substrates. Features and Benefits Molded in decorative pattern or solid colors Acrylic cap for scratch and mar protection Tough, high impact thermoplastic TPO substrate Good UV protection and resistance Paint surface without prime coat Wide thermoforming process window Vibration resistant Low CLTE for dimensional stability Target Markets & Applications Extreme™ D is a great choice for a wide range of applications and market segments Agricultural & Construction Equipment - for engine hoods, covers, fenders, instrument panels Medium & Heavy Truck - for front bumpers, air deflectors, tank flares Recreational Vehicles - for front bumpers, end caps, light bars, slide out covers Power Sports - for ATV fenders, body armor, front hoods, canopies, dash boards, accessories Automotive Aftermarket - for scoops/spoilers, body armor, ground effects, tonneau covers Lawn & Garden - for fenders, front hoods, instrument fronts, canopies Marine - for kayak and paddle boat decks, canoe body and instrument panels Processing Extreme™ D TPO Sheet can be thermoformed in standard thermoforming ovens, although zoned ceramic or quartz heaters are recommended. Forming over temperature-controlled aluminum tooling results in the best part aesthetics. Molds made from fiberglass or epoxy, can be used for tooling prototyping or small part runs. Care must be taken in forming to heat sheet evenly and not overheat. Stock temperatures of approximately 340 °F - 360 °F are recommended targets, but each process should be adjusted to allow proper forming. As with any thermoplastic material, coefficient of thermal expansion and mold shrinkage should be considered for proper part fit and tooling design. Availability Print Patterns & Solid Colors Extreme™ D overlays are available in standard print patterns such as camouflages, graphite and wood grains as well as custom and solid colors. Extreme™ D substrate layer is offered in a wide variety of custom colors for matching. Available Textures - Smooth hair cell and calf Extreme™ D is a custom extruded sheet product Sheet Size maximum width is 62-inch Gauges 0.060 - 0.400-inch Minimum Order - 5,000 lbs. per production run. Acrylic film minimum order requirement is 800 lbs.

Message

Extreme™ D is a high performance polyolefin sheet which has been enhanced with a decorative pattern. For those OEM's looking for design flexibility and a desire to differentiate their product with a camouflages, wood grains, marble, stone, graphite look, or custom solid colors Extreme™ D is the most cost effective product in the marketplace for large part thermoforming applications. Extreme™ D is a replacement option for painted surfaces or can act as an adhesion layer for painting TPO substrates.

Features and Benefits

Molded in decorative pattern or solid colors

Acrylic cap for scratch and mar protection

Tough, high impact thermoplastic TPO substrate

Good UV protection and resistance

Paint surface without prime coat

Wide thermoforming process window

Vibration resistant

Low CLTE for dimensional stability

Target Markets & Applications
Extreme™ D is a great choice for a wide range of applications and market segments

Agricultural & Construction Equipment - for engine hoods, covers, fenders, instrument panels

Medium & Heavy Truck - for front bumpers, air deflectors, tank flares

Recreational Vehicles - for front bumpers, end caps, light bars, slide out covers

Power Sports - for ATV fenders, body armor, front hoods, canopies, dash boards, accessories

Automotive Aftermarket - for scoops/spoilers, body armor, ground effects, tonneau covers

Lawn & Garden - for fenders, front hoods, instrument fronts, canopies

Marine - for kayak and paddle boat decks, canoe body and instrument panels

Processing
Extreme™ D TPO Sheet can be thermoformed in standard thermoforming ovens, although zoned ceramic or quartz heaters are recommended. Forming over temperature-controlled aluminum tooling results in the best part aesthetics. Molds made from fiberglass or epoxy, can be used for tooling prototyping or small part runs. Care must be taken in forming to heat sheet evenly and not overheat. Stock temperatures of approximately 340 °F - 360 °F are recommended targets, but each process should be adjusted to allow proper forming. As with any thermoplastic material, coefficient of thermal expansion and mold shrinkage should be considered for proper part fit and tooling design.

Availability
Print Patterns & Solid Colors
Extreme™ D overlays are available in standard print patterns such as camouflages, graphite and wood grains as well as custom and solid colors.
Extreme™ D substrate layer is offered in a wide variety of custom colors for matching.
Available Textures - Smooth hair cell and calf
Extreme™ D is a custom extruded sheet product

Sheet Size maximum width is 62-inch

Gauges 0.060 - 0.400-inch

Minimum Order - 5,000 lbs. per production run. Acrylic film minimum order requirement is 800 lbs.

General Information
Features	Good Dimensional Stability Good Toughness Good UV Resistance High Impact Resistance High Scratch Resistance Paintable Vibration Damping
Uses	Agricultural Applications Automotive Applications Automotive Bumper Automotive Exterior Parts Automotive Exterior Trim Lawn and Garden Equipment Marine Applications Sporting Goods
Appearance	Colors Available Finishes Available
Forms	Sheet
Processing Method	Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.08 to 1.13	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	0.70	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	21.4	MPa	ASTM D638
Flexural Modulus	1860	MPa	ASTM D790
Flexural Strength	66.2	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	350	J/m	ASTM D256
Gardner Impact	30.5	J	ASTM D3029

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	116	°C	ASTM D648
CLTE - Flow (-30 to 30°C)	4.0E-5	cm/cm/°C	ASTM D696

Optical	Nominal Value		Test Method
Gardner Gloss	25 to 30		ASTM D523

Additional Information	Nominal Value	Unit
Thermoforming Molding Temperature	171 to 182	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 209 MS UV	RTP Company	Nylon 66	RTP
RTP EMI 2560.5	RTP Company	PC+ABS	RTP
WPP PP PPH2UFO-UV DX9 Black	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
ALCOM® PP 620/9 MRX80	ALBIS PLASTIC GmbH	PP Random Copolymer	ALCOM® PP
Polygen SFG6C-BK	Shanghai Polygen Science and Technology Co., Ltd.	PPS	Polygen