Order Products : sales@su-jiao.com
DOW™ LLDPE DNDA-8335 NT 7
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5M83Ag_DOW-LLDPE-DNDA-8335-NT-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
DOW DNDA-8335 NT 7 linear low density polyethylene (LLDPE) resin was prepared by UNIPOL™PE process technology is suitable for general injection molding. This resin has excellent impact strength, rigidity, environmental stress cracking resistance and processability.
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.926 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal, F50) | 10.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 11.0 | MPa | ASTM D638 |
| Fracture | 7.58 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 2.0 | % | ASTM D638 |
| Fracture | 75 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 393 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength 1 | 189 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 45.0 | °C | ASTM D648 |
| Brittleness Temperature | -76.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 92.2 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 123 | °C | Internal method |
| Peak Crystallization Temperature (DSC) | 108 | °C | Internal method |
| Additional Information |
|---|
| 根据 ASTM D 4976 进行基板模制和测试。 |
| Note Message | |
|---|---|
| 1 . | Type s |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4807 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Sindustris ABS LMP322 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Tuftec™ H1141 | AKelastomers | SEBS | Tuftec™ |
| DOMAMID® 66STZ | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| KUBE PIR 22302 | KUBE Electronics AG | HDPE | KUBE PIR |
