Order Products : sales@su-jiao.com
TECHLEN M1252
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | DAEHA Co., LTD |
| Trademark: | TECHLEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5KwnHl_TECHLEN-M1252.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECHLEN M1252 is a Polypropylene material filled with talc. It is available in Asia Pacific. Typical application of TECHLEN M1252: Automotive |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 30.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 40 | % | ASTM D638 |
| Flexural Modulus | 2790 | MPa | ASTM D790 |
| Flexural Strength | 39.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | ASTM D256 | ||
| -10°C | 44 | J/m | |
| 23°C | 69 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 135 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STERalloy™ FDG 2036-5 | Hapco Inc. | TP, Unspecified | STERalloy™ FDG |
| Yanshan PE LD165 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Formolene® LH5214 | Formosa Plastics Corporation, U.S.A. | HDPE | Formolene® |
| HiFill® PA6/6 GF45 L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| HiFill® PA6/6 GF30 L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
