Order Products : sales@su-jiao.com
Desmovit® DP R Eco NF10
| Category: | TPU-Ester/Ether , Thermoplastic Polyurethane Elastomer (Ester/Ether) |
| Manufacturer: | geba Kunststoffcompounds GmbH |
| Trademark: | Desmovit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5HQUFt_Desmovit-DP-R-Eco-NF10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A further advantage is the fracture behaviour. The material forms no sharp edges when breaking, so that the risk of injury is reduced to a minimum. Desmovit ® DP R Eco NF can be perfectly used for the production of sporting goods. Besides the above mentioned advantages, injection moulders can score with the title "usage of renewable raw materials". The ecological thought is underlined by the haptics and optics of the material. Currently, Desmovit ® DP R Eco NF is offered with a 10% and 20% natural-fibre reinforcement. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 63 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 39.0 | MPa | ISO 527-2/200 |
| Tensile Strain (Break) | 16 | % | ISO 527-2/200 |
| Flexural Modulus 1 | 649 | MPa | ISO 178 |
| Flexural Stress 2(23°C) | 25.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 8.0 | kJ/m² | |
| 23°C | 29 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 75 | kJ/m² | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 94.0 | °C | ISO 306/B50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 6.0 | hr | |
| Processing (Melt) Temp | 190 to 210 | °C | |
| Mold Temperature | 40.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | 1.0 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Nylon 1013B | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| DENKA ABS GR-0500 | Denka Company Limited | ABS | DENKA ABS |
| Hifax RTA3223 | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| IROGRAN® A 92 H 4656 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| Sylvin 8490-70UV Natural | Sylvin Technologies Incorporated | CPE | Sylvin |
