Order Products : sales@su-jiao.com
KRATON® G7723 GS-N
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5Gfw3K_KRATON-G7723-GS-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G7723 GS-N is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below.
Kraton G7723 GS-N is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 to 0.950 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) (250°C/5.0 kg) | 3.0 to 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 78 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 12.1 | MPa | ASTM D412 |
| Tensile Strength 2(Yield) | 16.7 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 400 | % | ASTM D412 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Styrene/Rubber ratio | 30/70 |
| Note Message | |
|---|---|
| 1 . | Typical properties determined on film cast from toluene solution |
| 2 . | Typical properties determined on film cast from toluene solution |
| 3 . | Typical properties determined on film cast from toluene solution |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E190 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Yanshan PE 6600B | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| ExxonMobil™ LLDPE LL 8555 Series | ExxonMobil Chemical | LLDPE | ExxonMobil™ LLDPE |
| Plenco 04349 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| Sylvin 3280-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
