Order Products : sales@su-jiao.com

PrimeCast® 101

Category:	PS (Specialty) , Specialty Polystyrene
Manufacturer:	EOS GmbH
Trademark:	PrimeCast®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5FVLIQ_PrimeCast-101.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PrimeCast 101, a grey powder on polystyrene basis, is suited especially for investment casting due to its excellent dimensional accuracy and its low melting point. Laser-sintered parts made from PrimeCast 101 possess excellent material properties: excellent dimensional accuracy very high surface quality good strength for use as lost pattern The typical application for PrimeCast 101 is the production of lost patterns for the plaster and ceramic shell casting process. The material is optimised for minimum residue ash content after burning-out. Another application for PrimeCast 101 is the production of master patterns for vacuum casting, herby it is advised to infiltrate the parts with e.g. epoxy resin.

Message

PrimeCast 101, a grey powder on polystyrene basis, is suited especially for investment casting due to its excellent dimensional accuracy and its low melting point.

Laser-sintered parts made from PrimeCast 101 possess excellent material properties:

excellent dimensional accuracy

very high surface quality

good strength for use as lost pattern

The typical application for PrimeCast 101 is the production of lost patterns for the plaster and ceramic shell casting process. The material is optimised for minimum residue ash content after burning-out. Another application for PrimeCast 101 is the production of master patterns for vacuum casting, herby it is advised to infiltrate the parts with e.g. epoxy resin.

General Information
Features	Good Strength Outstanding Surface Finish
Uses	Mold Making Molds/Dies/Tools Patterns Prototyping
Appearance	Grey
Forms	Powder
Processing Method	3D Printing, Laser Sintering/Melting

Physical	Nominal Value	Unit	Test Method
Density	0.770	g/cm³	Internal Method
Decomposition Temperature	229 to 555	°C	DIN 51006

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1600	MPa	ISO 527-2
Tensile Stress	5.50	MPa	ISO 527-2
Tensile Strain (Break)	0.40	%	ISO 527-2

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature ¹	105	°C	ISO 11357

Note Message
1 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
PRIMALLOY® B1910	Mitsubishi Chemical Performance Polymers, Inc.	TPE	PRIMALLOY®
Stanyl® TE250F9	DSM Engineering Plastics	Nylon 46	Stanyl®
DENYL HT 3510 Y	Vamp Tech	PPA	DENYL
Geon™ HC 2175	PolyOne Corporation	PVC, Flexible	Geon™ HC
Petro Rabigh PP FS3011E	Rabigh Refining & Petrochemical Co.	PP Homopolymer	Petro Rabigh PP