| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5EgPyL_DJSilicone-NE-G171.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| This product has both excellent high and low temperature resistant properties. Adopted special fomula and technical process, it owns better heat and high temperature resistance than common silicone rubber. Among them, milky white, translucent or white color is available for common series while light yellow or brown red color is available for standard series. This product can be persistently used under the temperature 250°C and its instantaneous high temperature resistance can be up to 300°C, which is suitable for making various kinds of high temperature resistant gasket, roller, sealing strip and so on. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 to 1.27 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 67 to 73 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 8 | % | ASTM D412 |
| Tensile Strength (Yield) | > 7.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 220 | % | ASTM D412 |
| Tear Strength | > 20.0 | kN/m | ASTM D624 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanjing Hongrui PA66 A860 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 66 | Nanjing Hongrui PA66 |
| Ateva® 1075A | Celanese EVA Performance Polymers | EVA | Ateva® |
| Dynaflex™ G7660-1 (Natural) | PolyOne Corporation | TPE | Dynaflex™ |
| KOPLA PA66 KDG1060 | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
| Kuraray Poval® PVA L-9-78 | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |