Order Products : sales@su-jiao.com
Polifil® Nylon 628L-33GF
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5DOMF0_Polifil-Nylon-628L-33GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polifil® Nylon 628L-33GF is a Polyamide 66 (Nylon 66) product. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 2.0 | % | ASTM D955 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.75 | % | |
| Saturation | 5.4 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 190 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 3.0 | % | |
| Break | 3.0 | % | |
| Flexural Modulus | 8960 | MPa | ASTM D790 |
| Flexural Strength (Break) | 165 | MPa | ASTM D790 |
| Deformation Under Load (50°C, 14 MPa) | 0.800 | % | ASTM D621 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 252 | °C | |
| 1.8 MPa, Unannealed | 249 | °C | |
| Melting Temperature | 254 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 17 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 3.70 | ASTM D150 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 282 | °C | |
| Middle Temperature | 274 | °C | |
| Front Temperature | 271 | °C | |
| Nozzle Temperature | 260 to 299 | °C | |
| Processing (Melt) Temp | 279 to 304 | °C | |
| Mold Temperature | 71.1 to 82.2 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 to 1.03 | MPa | |
| Screw Speed | 50 to 80 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Colorite 11 Series 9511 | Colorite Polymers | PVC, Unspecified | Colorite 11 Series |
| Dryflex® 502600S | ELASTO | SEBS | Dryflex® |
| Hax™ HFX 509 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| INSULCAST® RTVS 42 CURTIS II | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® RTVS |
| Ipethene® 113 | Carmel Olefins Ltd. | LDPE | Ipethene® |
