Order Products : sales@su-jiao.com
Catalyst LV/1LR
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Catalyst |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5AwIo9_Catalyst-LV-1LR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The catalyst LV/1LR is a PE-based catalytic masterbatch that accelerates the crosslinking reaction during the solidification of pipeline products by exposing the pipeline to water or steam at high temperatures. The catalyst LV/1LR contains processing aids and low-reactivity aids that can improve processing performance under certain conditions. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.55 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 13 | g/10 min | ISO 1133 |
| Additional Information |
|---|
| 上述数据为典型的平均值用法及用量CATALYST LV/1LR应该与硅烷可交联POLIDAN ®化合物按照5%：95%的比例一起使用。这两种组份应在挤出前共混或在使用自动进料器时，在加工过程中连续混合。一般不需要预烘干催化剂母料。着色CATALYST LV/1LRV和 POLIDAN®化合物可以与高品质PE类色母粒一起使用。 苏威特种聚合物建议使用前，对任何色母粒进行预烘干。存储产品必须按下列条件存储：-密封，包装袋完好 环境温度不超过40°C -室内放置，避免在阳光下曝晒 存放时间过长会造成产品性状改变。苏威特种聚合物建议按照包装印制生产日期，在12个月内使用完毕。如果没有满足上述条件，苏威特种聚合物不承担任何责任。包装CATALYST LV/1LR 包装成25kg/袋，堆放于货板供应。技术服务CATALYST LV/1LR 属于苏威特种聚合物催化剂产品系列， 应与POLIDAN®化合物一起使用。苏威特种聚合物技术服务部门为客户提供包括投产和产品使用过程中任何必要的进一步信息和建议。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 200 | °C | |
| Cylinder Zone 2 Temp. | 150 - 200 | °C | |
| Cylinder Zone 3 Temp. | 150 - 200 | °C | |
| Cylinder Zone 4 Temp. | 150 - 200 | °C | |
| Cylinder Zone 5 Temp. | 150 - 200 | °C | |
| Head Temperature | 200 | °C | |
| Extruder Screw L/D Ratio | 25:1 ~ 30:1 | ||
| Extruder Screw Compression Ratio | >2.5:1 | ||
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| 与POLIDAN®交联牌号共混的常用挤塑温度 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ratron® 250C4 | Asia International Enterprise (Hong Kong) Limited | PESU | Ratron® |
| Unichem 9732NC-BLACK-55 | Colorite Polymers | PVC, Rigid | Unichem |
| CYREX® 200-8000 | Evonik Cyro LLC | PC+Acrylic | CYREX® |
| EMAC® SP2404 | Westlake Chemical Corporation | EMA | EMAC® |
| Hifax TKC220X 1 | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
