Order Products : sales@su-jiao.com

SuperLite® SL550900-100 (2.5mm)

Category:	PP, Unspecified , Polypropylene
Manufacturer:	Azdel, Inc.
Trademark:	SuperLite®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5AEaLK_SuperLite-SL550900-100-2-5mm-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AZDEL SuperLite SL550900-100 (2.5mm) is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the application (i.e.; adhesive films, barrier films, scrim, tough PP films, non-wovens, reinforcements or just the bare surface.) Typically used in non-structural applications where a very high strength to weight ratio is required, such as automotive headliners, door panels, package shelves, and other interior trim.

Message

AZDEL SuperLite SL550900-100 (2.5mm) is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the application (i.e.; adhesive films, barrier films, scrim, tough PP films, non-wovens, reinforcements or just the bare surface.) Typically used in non-structural applications where a very high strength to weight ratio is required, such as automotive headliners, door panels, package shelves, and other interior trim.

General Information
Filler / Reinforcement	Long glass fiber, 55% filler by weight
Appearance	Black Natural color
Forms	Sheet

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.419	g/cm³	ASTM D792
Molding Shrinkage - Flow	< 0.020	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3000	MPa	ASTM D638
Tensile Strength	24.0	MPa	ASTM D638

Impact	Nominal Value	Unit	Test Method
Instrumented Dart Impact			ASTM D3763
23°C, Energy at Peak Load	2.60	J	ASTM D3763
23°C, Total Energy	6.90	J	ASTM D3763

Additional Information
Multi-axial Impact Peak Force, ASTM D3763, 23°C: 740 NMass per unit area, Internal Test Method: 900 g/m²Flexual Strength, SAE J949: 14 MPaFlexual Modulus, SAE J949: 1150 MPa

Resin Grade	Manufacturer	Category	Trademark
RTP 885 UV	RTP Company	Acetal (POM) Copolymer	RTP
EPIMIX POM IMP NC B001	EPSAN Plastik SAN. ve TiC. A.S.	Acetal (POM) Copolymer	EPIMIX
Iupital® F25-03	Mitsubishi Engineering-Plastics Corp	Acetal (POM) Copolymer	Iupital®
LUVOCOM® 1105/GF/30/NAT-2	Lehmann & Voss & Co.	PEEK	LUVOCOM®
LEXAN™ 101 resin	SABIC Innovative Plastics	PC	LEXAN™