Order Products : sales@su-jiao.com

Tarnamid® T-27 GF30 V2

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Grupa Azoty S.A.
Trademark:	Tarnamid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	57qXeg_Tarnamid-T-27-GF30-V2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Tarnamid® T-27 GF30 V2 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.

Important attributes of Tarnamid® T-27 GF30 V2 are:

Flame Rated

Chemical Resistant

Fatigue Resistant

Flame Retardant

Food Contact Acceptable

Typical applications include:

Automotive

Engineering/Industrial Parts

Construction Applications

Electrical/Electronic Applications

Fabrics/Fibers

General Information
Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Features	Acid Resistant Base Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Good Abrasion Resistance Good Chemical Resistance Good Strength High Hardness High Heat Resistance High Impact Resistance Low Friction Medium Rigidity Opticals Solvent Resistant Vibration Damping
Uses	Automotive Electronics Automotive Exterior Parts Automotive Interior Parts Automotive Under the Hood Connectors Food Packaging Furniture Household Goods Machine/Mechanical Parts Monofilaments Profiles Reinforced Panels Rods Safety Helmets Sporting Goods Tubing
Forms	Pellets
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1.45	--	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (275°C/5.0 kg)	35	--	g/10 min	ISO 1133
Molding Shrinkage	0.20	1.1	%	ISO 294-4
Water Absorption (23°C, 24 hr)	0.80	--	%	ISO 62

Hardness	Dry	Conditioned	Unit	Test Method
Ball Indentation Hardness (H 358/30)	230	--	MPa	ISO 2039-1

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	9500	--	MPa	ISO 527-2
Tensile Stress (Yield)	140	--	MPa	ISO 527-2
Tensile Strain (Break)	4.0	--	%	ISO 527-2
Flexural Modulus	8000	--	MPa	ISO 178
Flexural Stress (3.5% Strain)	200	--	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength	10	--	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength	70	--	kJ/m²	ISO 179/1eU
Notched Izod Impact Strength	12	--	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	200	--	°C	ISO 75-2/A
Vicat Softening Temperature	210	--	°C	ISO 306/B50

Flammability	Dry	Conditioned		Test Method
Flame Rating (3.20 mm)	V-2	--		UL 94

Injection	Dry	Unit
Drying Temperature	80.0 to 100	°C
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	250 to 290	°C
Mold Temperature	80.0 to 120	°C
Injection Pressure	80.0 to 130	MPa
Injection Rate	Moderate

Resin Grade	Manufacturer	Category	Trademark
Bashplast Compound SSP-A17 (BP)/CB-B25 (BP)	Bashplast Ltd.	PE, Unspecified	Bashplast Compound
Colorite CS Series CS1521SC	Colorite Polymers	PVC, Flexible	Colorite CS Series
Plaslube® J-1305/30/TF/15	Techmer Engineered Solutions	PPS	Plaslube®
Lucon® CP6059F	LG Chem Ltd.	PC	Lucon®
FUDOWPREMIX® FP100F typeA	Fudow Co., Ltd.	Polyester, TS	FUDOWPREMIX®