Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-2095-60A/B
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 567MA3_Shin-Etsu-Elastomer-KE-2095-60A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Shin-Etsu KE-2095-60 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-60 is low enough to allow easy pumping through most injection molding systems.
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 60 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 8.30 | MPa | |
| Tensile Elongation (Break) | 310 | % | |
| Tear Strength 1 | 35.0 | kN/m | |
| Compression Set (180°C, 22 hr) | 10 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (32°C) | 26 | wk |
| Additional Information |
|---|
| Press / Post Cure: Press |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 0.17 | hr |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Roechling SUSTAABS | Röchling Sustaplast SE & Co. KG | ABS | Roechling |
| RABALON® MJ6301C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| NYLEM® 66 GFR 50 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| ENFLEX VL-120-80A | Ravago Group | PP+EPDM | ENFLEX |
| Kangxi® PC/ABSHI-50 | Wuxi Kangxi Plastics Technology Co.,Ltd. | PC+ABS | Kangxi® |
