Order Products : sales@su-jiao.com

Eltex® LGB263N2070

Category:	HDPE , High Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	55uN3H_Eltex-LGB263N2070.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Eltex® LGB263N2070 high density polyethylene is a white compound manufactured by INEOS Polyolefins. It contains 5% titanium dioxide and is intended for the co-extrusion of bottles for the packaging of UHT sterilized milk. The resin is specifically designed for 3- or 6- layer bottles. It guarantees the preservation of the organoleptic properties of milk and has the following essential properties: High density, ensuring good rigidity of finished products A melt viscosity which ensures easy processing A very low odour level It meets EU and FDA regulations governing the approval of materials used in the manufacture of packaging which may come into contact with food products.

Message

Eltex® LGB263N2070 high density polyethylene is a white compound manufactured by INEOS Polyolefins. It contains 5% titanium dioxide and is intended for the co-extrusion of bottles for the packaging of UHT sterilized milk.

The resin is specifically designed for 3- or 6- layer bottles. It guarantees the preservation of the organoleptic properties of milk and has the following essential properties:

High density, ensuring good rigidity of finished products

A melt viscosity which ensures easy processing

A very low odour level

It meets EU and FDA regulations governing the approval of materials used in the manufacture of packaging which may come into contact with food products.

General Information
Additive	Titanium Dioxide (TiO2) (5%)
Features	Food Contact Acceptable Good Organoleptic Properties Good Processability High Density Low to No Odor Med.-Wide Molecular Weight Distrib. Medium Rigidity
Uses	Bottles Food Packaging
Agency Ratings	EU Food Contact, Unspecified Rating FDA Food Contact, Unspecified Rating
RoHS Compliance	Contact Manufacturer
Appearance	White
Processing Method	Coextrusion

Physical	Nominal Value	Unit	Test Method
Density ¹	1.00	g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.70	g/10 min	ISO 1133
Viscosity ²(190°C)	1200000	mPa·s	Internal Method

Note Message
1 .	Compression molded discs, cooled at 15°C per minute
2 .	Apparent dynamic viscosity of the material extruded at 190°C through a 1.0 mm diameter and 15 mm long die, at apparent shear rate 100/s

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom SCR1-5010	Spartech Polycom	ABS	Spartech
VESTOSINT® 1111 colored	Evonik Industries AG	Nylon 12	VESTOSINT®
ALCOM® POM 770/1 Si2	ALBIS PLASTIC GmbH	Acetal (POM) Copolymer	ALCOM® POM
DISTRUMID 6 MI	Distrupol	Nylon 6	DISTRUMID
Geon™ Vinyl Wire & Cable WR8180L	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Wire & Cable