Order Products : sales@su-jiao.com
G-Lex E52A003
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Gas Authority of India Limited |
| Trademark: | G-Lex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 52rk3U_G-Lex-E52A003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
G-Lex E52A003 is a High Density Polyethylene material. It is available in Asia Pacific for extrusion or pipe extrusion. Important attributes of G-Lex E52A003 are:
Typical application of G-Lex E52A003: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.28 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus | 696 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 230 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 122 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Propionate 360E0096907 Natural, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| XANTAR® C CM 206 | Mitsubishi Engineering-Plastics Corp | PC+ABS | XANTAR® C |
| Elastollan® C 60 A HPM | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| Optix® CA-82 | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| Durethan® AKV 35 HR H2.0 901510 | LANXESS Corporation | Nylon 66 | Durethan® |
