Order Products : sales@su-jiao.com
Desmopan® 487
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4xrGkg_Desmopan-487.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; grease and oil-resistant; low compression set; good heat resistance; short cycle times; Application; Automotive engineering; Roller coating; Seals, membranes; Damping elements |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.20 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A, 23°C | 86 | ||
| Shore D, 23°C | 33 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | DIN 53504 | ||
| Break, 23°C | 41.8 | MPa | |
| 10% Strain, 23°C | 1.60 | MPa | |
| 50% Strain, 23°C | 4.50 | MPa | |
| 100% Strain, 23°C | 5.80 | MPa | |
| 300% Strain, 23°C | 14.4 | MPa | |
| Tensile Strain 2(Break, 23°C) | 540 | % | DIN 53504 |
| Abrasion Resistance (23°C) | 12.0 | mm³ | ISO 4649-A |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 183 | MPa | |
| 20°C | 36.0 | MPa | |
| 60°C | 24.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience (23°C) | 45 | % | ISO 4662 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3(23°C) | 84 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 13 | % | |
| 70°C, 24 hr | 26 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 80.0 | °C | |
| Processing (Melt) Temp | 230 to 240 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 200 mm/min |
| 2 . | 200 mm/min |
| 3 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Battery GPP1001HFNH-2-AT(18) Natural | S&E Specialty Polymers, LLC | TPO | S&E Battery |
| Sumikon® PM-6432 | Sumitomo Bakelite Co., Ltd. | Phenolic | Sumikon® |
| Andur 8000-AP/Curene® 185 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Delrin® 500AL NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Globalene® 8191 | Lee Chang Yung Chemical Industry Corp. | PP, Unspecified | Globalene® |
