Order Products : sales@su-jiao.com

Extir® CM Galileo Europa 5 Gold

Category:	PS (EPS) , Expanded Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Extir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4xVyug_Extir-CM-Galileo-Europa-5-Gold.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extir CM is the new range of expandable products produced using Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC. Extir CM Galileo Europa 5 Gold contains an atherman additive that reduces heat transfer and the items produced with it, grey in colour, have the best thermal insulation properties. Its particular formula permits the use of thinner boards to get the same thermal resistance. Applications Extir CM Galileo Europa 5 Gold achieves maximum thermal insulation performance. It is therefore recommended for all applications in which thickness is a limiting factor and fire resistance is not compulsory: cavity wall insulation thermoacoustic panels coupled with plasterboard.

Message

Extir CM is the new range of expandable products produced using Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC.
Extir CM Galileo Europa 5 Gold contains an atherman additive that reduces heat transfer and the items produced with it, grey in colour, have the best thermal insulation properties. Its particular formula permits the use of thinner boards to get the same thermal resistance.

Applications
Extir CM Galileo Europa 5 Gold achieves maximum thermal insulation performance. It is therefore recommended for all applications in which thickness is a limiting factor and fire resistance is not compulsory:

cavity wall insulation

thermoacoustic panels coupled with plasterboard.

General Information
Additive	Blowing Agent Heat Stabilizer
Features	Expandable Good Surface Finish Low Shrinkage Thermally Insulating
Uses	Insulation Reinforced Panels
Appearance	Grey

Physical	Nominal Value	Unit
Density	0.0120 to 0.0250	g/cm³
Apparent Density
-- ¹	0.01	g/cm³
-- ²	0.02	g/cm³
--	0.59 to 0.63	g/cm³
Particle Size	0.900 to 1.60	mm

Note Message
1 .	on a continuous pre-expander after two expansions
2 .	on a discontinuous pre-expander

Resin Grade	Manufacturer	Category	Trademark
SABIC® LLDPE 118WJ	Saudi Basic Industries Corporation (SABIC)	LLDPE	SABIC® LLDPE
UBE Polyethylene J5019	UBE America, Inc.	PE, Unspecified	UBE Polyethylene
KEP® 350	Kumho Polychem Co., Ltd.	EPDM	KEP®
KOPA® KN333G30GR	Kolon Plastics, Inc.	Nylon 66	KOPA®
KumhoSunny PC 2203HI	Shanghai KumhoSunny Plastics Co., Ltd.	PC	KumhoSunny PC