Order Products : sales@su-jiao.com

MERICAN® -9406

Category:	Polyester Alloy , Polyester Alloy
Manufacturer:	Huachang Polymer Co., Ltd.
Trademark:	MERICAN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4wQhXl_MERICAN--9406.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

MERICAN-9406 is iso type unsaturated polyester resin. It presents good water-proof, oil and temperature resistant properties.

PROPERTY

Good mechanical performance and high tensile elongation.

Lloyd's Registered.

Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials.

APPLICATION

FRP boats, such as fishing boat, marine/yacht, life boat, etc.

Tanks, pipes and various glass fiber and carbon fiber reinforced plastic products.

Heat resistant FRP products.

Can be used in filament winding, pultrusion, spray-up and hand lay-up process.

General Information
Features	Food Contact Acceptable High Elongation High Heat Resistance Low to No Water Absorption Oil Resistant
Uses	Marine Applications Piping Tanks Water Sports Equipment
Agency Ratings	FDA 21 CFR 177.2420
Appearance	Yellow
Processing Method	Filament Winding Hand Lay-up Pultrusion Spraying

Physical	Nominal Value	Unit	Test Method
Acid Value	5.00 to 12.00	mg KOH/g
Solids Content	59 to 65	%

Thermal	Nominal Value	Unit	Test Method
Thermal Stability (80°C)	> 1	day

Thermoset	Nominal Value	Unit
Gel Time (25°C)	10.0 to 14.0	min

Additional Information	Nominal Value	Unit
Gel to Peak	10.0 to 20.0	min
Peak Exotherm	160 to 180	°C

Hardness	Nominal Value	Unit	Test Method
Barcol Hardness	42		ASTM D2583

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3600	MPa	ASTM D638
Tensile Strength	74.0	MPa	ASTM D638
Tensile Elongation (Break)	3.8	%	ASTM D638
Flexural Modulus	3600	MPa	ASTM D790
Flexural Strength	118	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	105	°C	ASTM D648

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity (25°C)	300 to 500	cP

Resin Grade	Manufacturer	Category	Trademark
Unichem 4196	Colorite Polymers	PVC, Unspecified	Unichem
Grilamid® LVX-65H SST nat	EMS-GRIVORY	Nylon 12	Grilamid®
INSULCAST® RTVS 3-95-2	ITW Polymers Coatings North America	Silicone Rubber, RTV-2	INSULCAST® RTVS
PLUSTEK RA601	Polyram Ram-On Industries	Nylon 66	PLUSTEK
Sylvin 7833-85 Red 6294	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin