Order Products : sales@su-jiao.com
Thermoset Plastics DC-232
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4vv5pG_Thermoset-Plastics-DC-232.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics DC-232 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for casting or encapsulating. Primary attribute of Thermoset Plastics DC-232: Insulating. Typical application of Thermoset Plastics DC-232: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.32 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 47.2 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.8 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 22 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 3.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 3.00 | ASTM D150 | |
| Dissipation Factor (100 Hz) | 2.0E-3 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shelf Life (25°C) | 13 | wk | |
| Thermoset Mix Viscosity (25°C) | 1500 | cP | ASTM D2393 |
| Demold Time | 120 to 180 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Badamid® LA70 S K | Bada AG | Nylon 66 | Badamid® |
| Badalac® ABS 20 | Bada AG | ABS | Badalac® |
| Buna® EP T KA 8930 | LANXESS Corporation | EPM | Buna® EP |
| LEXAN™ HP2 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| LNP™ LUBRICOMP™ KG002 compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ LUBRICOMP™ |
