RTP 1300 MG 50 SI 2

Category: PPS , Polyphenylene Sulfide
Manufacturer: RTP Company
Trademark: RTP
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 4vepyp_RTP-1300-MG-50-SI-2.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Warning: The status of this material is 'Commercial: Limited Issue'

The data for this material has not been recently verified.
Please contact RTP Company for current information prior to specifying this grade.

-Preliminary Product Data per RTP Co.-
General Information
Filler / Reinforcement
  • Glass fiber reinforced material, 50% filler by weight
Additive
  • Silicone lubricant (2%)
Features
  • Lubrication
RoHS Compliance
  • Contact manufacturer
Appearance
  • Black
  • Natural color
Forms
  • Particle
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.73g/cm³ASTM D792
Molding Shrinkage - Flow (3.18 mm)0.20%ASTM D955
Water Absorption (23°C, 24 hr)0.020%ASTM D570
HardnessNominal ValueUnitTest Method
Rockwell Hardness (R-Scale)123ASTM D785
MechanicalNominal ValueUnitTest Method
Tensile Modulus 13800MPaASTM D638
Tensile Strength 103MPaASTM D638
Tensile Elongation (Break)1.0%ASTM D638
Flexural Modulus 12400MPaASTM D790
Flexural Strength 172MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (3.18 mm)64J/mASTM D256
Unnotched Izod Impact (3.18 mm)320J/mASTM D4812
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load ASTM D648
    0.45 MPa, not annealed 266°CASTM D648
    1.8 MPa, not annealed 260°CASTM D648
ElectricalNominal ValueUnitTest Method
Volume Resistivity 1.0E+16ohms·cmASTM D257
FlammabilityNominal ValueUnitTest Method
Flame Rating (1.59 mm)V-0UL 94
Additional Information
Mold Shrinkage, Linear-Flow, ASTM D-955, 0.25in.: 3mil/in.
InjectionNominal ValueUnit
Drying Temperature 149°C
Drying Time 6.0hr
Suggested Max Moisture 0.040%
Suggested Max Regrind 20%
Rear Temperature 302 - 343°C
Middle Temperature 302 - 343°C
Front Temperature 302 - 343°C
Mold Temperature 135 - 177°C
Injection Pressure 103 - 138MPa
Clamp Tonnage 6.9 - 11kN/cm²
Resin Grade Manufacturer Category Trademark
Valtra® EC6025 Saudi Polymers Company PS (HIPS) Valtra®
Fibremod™ GB601HP Borealis AG PP, Unspecified Fibremod™
Elastollan® 1185 A HFFR BASF Polyurethanes GmbH TPU-Polyether Elastollan®
MAJORIS PC 9381 10 FV AD majoris PC MAJORIS
SABIC® PPcompound 3726E Saudi Basic Industries Corporation (SABIC) PP, Unspecified SABIC® PPcompound