Order Products : sales@su-jiao.com
En Chuan 6120
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4t67FI_En-Chuan-6120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This is an non-wax non-thixotropy, and non-accelerator resin. It has the good physical properties and excellent performance in the fabrications of pipes and tanks that apply filament winding processes. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 40 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus 2 | 8730 | MPa | ASTM D790 |
| Flexural Strength 3 | 216 | MPa | ASTM D790 |
| Additional Information |
|---|
| Red Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.45 - 0.65 | Pa·s | |
| Gel Time (25°C) | 6.5 - 15 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 4 | 133 | MPa |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 |
| 2 . | Filled |
| 3 . | Filled |
| 4 . | Filled |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIMMA® SD6350H | Samyang Corporation | Acrylic (PMMA) | TRIMMA® |
| ADDILENE H 652 | ADDIPLAST | PP Homopolymer | ADDILENE |
| Ducor® DE1040N | Ducor Petrochemicals BV | PP Homopolymer | Ducor® |
| Petro Rabigh PP FY4012E | Rabigh Refining & Petrochemical Co. | PP Homopolymer | Petro Rabigh PP |
| Durethan® BKV 130 CS DUS008 600091 | LANXESS GmbH | Nylon 6 | Durethan® |
