Order Products : sales@su-jiao.com
Vistamaxx™ 6202FL
| Category: | PP Elastomer , Performance Polymer |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Vistamaxx™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4qIUGz_Vistamaxx-6202FL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vedamel 6202FL high-performance polymer is an olefin-based elastomer produced by ExxonMobil Chemical using proprietary metallocene catalytic technology. It is mainly composed of isotactic polypropylene repeating monomers and randomly distributed ethylene. "FL" means that this product has passed ExxonMobil Chemical's film appearance test in terms of crystal points and meets the requirements of high-performance film applications ("A" standard). |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.863 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) 2(190°C/2.16 kg) | 9.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Fracture | > 5.50 | MPa | ASTM D638 |
| 100% strain | 1.93 | MPa | ASTM D638 |
| 300% strain | 2.10 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 2000 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 12.3 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | 33.3 | kN/m | ASTM D624 |
| Additional Information |
|---|
| 按照 FDA 食品接触物质通告 (FCN) 第 832 部分，本产品可在 21 CFR 176.170(c ) 表 2 中所述的 B - H 使用条件下用作与所有类型食品接触的材料或其组成部分 。本产品所用的基础树脂是中国关于食品包装材料用树脂的肯定列表（2011 年 10 月 11 日由中国卫生部签发）中所列的树脂；而且，本产品中可能使用的添加剂 也符合中华人民共和国国家标准 GB9685-2008（即食品容器、包装材料用添加剂使 用卫生标准）。欧盟注释：本产品的成分符合欧盟规范 10/2011 关于食品接触的要求。请与客户服务部联系，索取包含更多详细信息的正式食品法规证书。有关耐化学性方面的数据，请参阅技术文献 (TL)“威达美高性能聚合物的耐化学 品性能”。 |
| Legal statement |
|---|
| 有关详细的产品监管信息，请联系客户服务。未经埃克森美孚化工书面允许，这种产品包括其产品名称，不得在任何医疗应用领域予以使用或 |
| Note Message | |
|---|---|
| 1 . | Properties are expressed in commonly used units of measurement. |
| 2 . | Properties are expressed in commonly used units of measurement. |
| 3 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® A TA8AOZ (Series: UV/AD1) | KRAIBURG TPE | TPE | THERMOLAST® A |
| TRIPET® 2500G20 | Samyang Corporation | PET | TRIPET® |
| DynaChar™ C1340 | Polymer Dynamix | PC Alloy | DynaChar™ |
| SCHULABLEND® (ASA/PA) M/MW 6201 MT | A. Schulman Europe | ASA+Nylon | SCHULABLEND® |
| LEXAN™ HFD1262 resin | SABIC Innovative Plastics | PC | LEXAN™ |
