Order Products : sales@su-jiao.com
EPO-TEK® H37-MP
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4oyMxn_EPO-TEK-H37-MP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EPO-TEK® H37-MP is a single component, electrically conductive, thixotropic silver-filled adhesive for die-attach and SMD attach inside hybrid microelectronic packages. Also available in a frozen syringe. Formerly EP108 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Ion Type | |||
| Cl- | < 200 | ppm | |
| K+ | < 50 | ppm | |
| Na+ | < 50 | ppm | |
| NH4+ | 65 | ppm | |
| Particle Size | < 20.0 | µm |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Degradation Temperature | 358 | °C | TGA |
| Die Shear Strength - >10 kg (23°C) | 23.4 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 200 | °C | |
| Intermittent | -55 to 300 | °C | |
| Storage Modulus (23°C) | 5.02 | GPa | |
| Thixotropic Index | 3.62 | ||
| Weight Loss on Heating | |||
| 200°C | 0.13 | % | |
| 250°C | 0.41 | % | |
| 300°C | 0.80 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 90.0 | °C | |
| CLTE - Flow | |||
| -- 2 | 5.2E-5 | cm/cm/°C | |
| -- 3 | 1.5E-4 | cm/cm/°C | |
| Thermal Conductivity | 1.6 | W/m/K |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shelf Life (-40°C) | 52 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | Silver | ||
| Density | 3.06 | g/cm³ | |
| Viscosity 4(23°C) | 22 to 26 | Pa·s | |
| Curing Time (150°C) | 1.0 | hr | |
| Pot Life | 40000 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 80 | ||
| Lap Shear Strength (23°C) | 13.0 | MPa | |
| Volume Resistivity (23°C) | < 5.0E-4 | ohms·cm |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | 10 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 CR10 BK111 | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Sicoklar UG81 | Ravago Group | PC | Sicoklar |
| ALCOM® POM 770/1 AR10 PTFE10 | ALBIS PLASTIC GmbH | Acetal (POM) Copolymer | ALCOM® POM |
| ASTALOY™ PC/ABS TWG | Marplex Australia Pty. Ltd. | PC+ABS | ASTALOY™ |
| HAIPLEN H50 X2 | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
