Order Products : sales@su-jiao.com
PRIMATOP MDPE 003937
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Amco Polymers |
| Trademark: | PRIMATOP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4iw3UL_PRIMATOP-MDPE-003937.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Excellent proformace on high stalk lines Excellent overall balance |
| General Information | |
|---|---|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D882 | ||
| MD : Yield, 25 µm | 21.4 | MPa | |
| TD : Yield, 25 µm | 21.4 | MPa | |
| MD : Break, 25 µm | 42.1 | MPa | |
| TD : Break, 25 µm | 42.1 | MPa | |
| Tensile Elongation 2 | ASTM D882 | ||
| MD : Break, 25 µm | 500 | % | |
| TD : Break, 25 µm | 600 | % | |
| Dart Drop Impact (25 µm) | 130 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 50 | g | |
| TD : 25 µm | 500 | g |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMIKASUPER® LCP E5006L | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| DIOSHY® TPU T995NC | DIOSHY Co.,Ltd. | TPU-Polyester | DIOSHY® |
| Exact™ 4049 | ExxonMobil Chemical | Plastomer | Exact™ |
| UBE Nylon 1022B | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| TECHNO ABS 430 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
