Order Products : sales@su-jiao.com

Pinnacle PP 1355Z

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4gahAg_Pinnacle-PP-1355Z.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

55 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATOR AND ANTISTAT FOR THIN WALL INJECTION MOLDING

Pinnacle Polymers Polypropylene 1355Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for thin-wall injection molded applications including closures, food containers and miscellaneous consumer products applications that require high stiffness.

The 1355Z product provides:

Superior set-up behavior

Excellent color and processing stability

Low odor and taste

Excellent flow characteristics

High stiffness

Nucleation and antistat

This product, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, and Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Food Contact Acceptable Good Color Stability Good Flow Good Processing Stability High Stiffness Homopolymer Low to No Odor Low to No Taste Nucleated
Uses	Closures Consumer Applications Food Containers Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	55	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	39.3	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	8.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1930	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	32	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	3.00	kJ/m²	ASTM D256

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I

Resin Grade	Manufacturer	Category	Trademark
Prixene® PC200I00I	POLYMAT	PP Impact Copolymer	Prixene®
Fiberfil® PP-61/CC/20	Fiberfil® Engineered Plastics Inc.	PP Copolymer	Fiberfil®
Dryflex® 500000	ELASTO	SEBS	Dryflex®
OmniCarb鈩?PC GR10	OMNI Plastics, LLC	PC	OmniCarb™
WELLAMID Nylon 6600/58 GV 15 HWCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 66	WELLAMID Nylon