Order Products : sales@su-jiao.com
TPSiV™ 4000-60A
| Category: | TPSiV , Thermoplastic Silicone Vulcanizate |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | TPSiV™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4ctuSG_TPSiV-4000-60A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPSiV® 4000-60A Thermoplastic Elastomer is a UV stable, colorable, thermoplastic elastomer with excellent bonding to polycarbonate, ABS, and similar polar substrates. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/10.0 kg) | 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 3.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 62 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 24.4 | MPa | ISO 178 |
| Flexural Stress | 1.51 | MPa | ISO 178 |
| Taber Abrasion Resistance (1000 Cycles) | 89.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.20 | MPa | ISO 37 |
| Tensile Stress (Yield) | 5.20 | MPa | ISO 37 |
| Tensile Elongation (Break) | 600 | % | ISO 37 |
| Tear Strength | 30 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 22 hr | 33 | % | |
| 70°C, 22 hr | 87 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 to 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 160 to 170 | °C | |
| Middle Temperature | 165 to 175 | °C | |
| Front Temperature | 170 to 180 | °C | |
| Nozzle Temperature | 180 to 200 | °C | |
| Processing (Melt) Temp | 190 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BECNO TL | Arkema | Nylon 11 | Rilsan® |
| Baoding 68T95 | Baoding Bangtai Polymeric New-Materials Co.,Ltd | TPU-Polyester | Baoding |
| Formolene® L42022B | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| Elastollan® S60DN | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyester | Elastollan® |
| Latistat 66-06 | LATI S.p.A. | Nylon 66 | Latistat |
