Order Products : sales@su-jiao.com
Gallonprene® GP210-6006
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4cFie5_Gallonprene-GP210-6006.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP210-6006 is a thermoplastic elastomer (TPE) product,. It can be processed by extrusion, profile extrusion or injection molding, and is available in Africa and the Middle East, Latin America or the Asia-Pacific region. Gallonprene®GP210-6006 application areas include engineering/industrial fittings and hoses. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.878 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/10.0 kg) | 26 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 12.5 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 800 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 - 220 | °C | |
| Middle Temperature | 210 - 230 | °C | |
| Front Temperature | 220 - 240 | °C | |
| Processing (Melt) Temp | 180 - 200 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Processing Temperature Limit: 280°CInjection Pressure: HighBack Pressure: 20 to 50%Overmolding Parameters:Rear Temperature: 210 to 230°CCenter Temperature: 220 to 240°CFront Temperature: 230 to 250°CMelt Temperature: 180 to 200°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 280°CInjection Pressure: HighInjection Speed: HighBack Pressure: 20 to 50% |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 - 180 | °C | |
| Cylinder Zone 2 Temp. | 170 - 190 | °C | |
| Cylinder Zone 3 Temp. | 180 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 299 X 83820 B | RTP Company | Nylon 66 | RTP |
| ResMart Ultra PBT 23 | ResMart | PBT | ResMart Ultra |
| ADEKA EH-4351S | Adeka Corporation | Epoxy | ADEKA |
| LUVOCOM® 80-7713-NA | Lehmann & Voss & Co. | Acetal (POM) Copolymer | LUVOCOM® |
| Plaslube® J-1/CF/10/TF/13/SI/2 BK223 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
