Order Products : sales@su-jiao.com
Capilene® SW 75 AV
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Carmel Olefins Ltd. |
| Trademark: | Capilene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4b5Tog_Capilene-SW-75-AV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CAPILENE ® SW 75 AV is a controlled rheology polypropylene heterophasic copolymer intended for high speed injection molding. CAPILENE ® SW 75 AV features: controlled rheology, nucleating and antistatic additives, good impact strength, very high flow, short molding cycle time and good dimensional stability. CAPILENE ® SW 75 AV is suitable for: thin walled packaging items, household articles and products with long flow length or complex design. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 65 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield 1 | 24.0 | MPa | ASTM D638 |
| Yield | 23.0 | MPa | ISO 527-2/50 |
| Tensile Elongation | |||
| Yield 2 | 8.0 | % | ASTM D638 |
| Yield | 8.0 | % | ISO 527-2/50 |
| Flexural Modulus | |||
| -- | 1200 | MPa | ASTM D790 |
| -- 3 | 1150 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -20°C | 45 | J/m | ASTM D256 |
| 23°C | 75 | J/m | ASTM D256 |
| -20°C | 5.0 | kJ/m² | ISO 180 |
| 23°C | 8.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed | 95.0 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 77.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 147 | °C | ISO 306/A, ASTM D1525 4 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHLEN GT217 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| ASTALOY™ PC/ABS KMA | Marplex Australia Pty. Ltd. | PC+ABS | ASTALOY™ |
| DENKA Transparent Polymer TE-20S | Denka Company Limited | ABS | DENKA Transparent Polymer |
| Sylvin 8600-70 CLEAR | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 2990-93 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
