Order Products : sales@su-jiao.com
Safron® H517-25RG
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4arosp_Safron-H517-25RG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
H517-25RG Polypropylene Resin is a controlled rheology polypropylene homopolymer resin suitable for the production of fibres and filaments on long- and short-spinning lines. H517-25RG Polypropylene Resin offers excellent processability at melt temperatures between 220 and 280 degrees C. H517-25RG Polypropylene Resin is modified to resist gas fading. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 26 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 31.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 8.0 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1370 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 3.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1 | |||
| 0.45 MPa, Unannealed | 75.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 51.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature 2 | 83.0 | °C | ISO 306/B |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA6MG40HSL-BK09 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
| Ultraform® H 2320 006 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Clariant Nylon 6/6 66G43M | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| ALTECH® PC ECO 2020/140 | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
| CERTENE™ 325 | Muehlstein | PS (HIPS) | CERTENE™ |
