Order Products : sales@su-jiao.com
Lustran® ABS 648
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | INEOS ABS (USA) |
| Trademark: | Lustran® ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4Uh4TA_Lustran-ABS-648.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lustran ABS 648 resin is a general-purpose injection molding grade of ABS (acrylonitrile butadiene styrene). It is a high-impact, high-gloss resin with a good balance of physical properties and easy flow to enhance moldability. Lustran ABS 648 is used in applications requiring extra toughness. It is well-suited for complex part designs with difficult-to-fill molds. Lustran ABS 648 is used in home appliances for floor care housings, vacuum cleaner housings, and kitchen electrical appliance housings; lawn and garden applications; and electric power tool housings. It is also used in irrigation parts and electrical utility boxes. Per the restrictions of the Consumer Product Safety Improvement Act (CPSIA) that went into effect on February 10, 2009, Lustran ABS 648 can not be used to manufacture children's toys or child care articles. As with any product, use of Lustran ABS 648 resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Specific Volume | 0.960 | cm³/g | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2340 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 40.7 | MPa | ASTM D638 |
| Flexural Modulus | 2480 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 3.18 mm | 80 | J/m | ASTM D256 |
| 23°C, 3.18 mm | 360 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 12.7mm | 87.8 | °C | ASTM D648 |
| 0.45 MPa, annealed, 12.7mm | 95.6 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 12.7mm | 82.2 | °C | ASTM D648 |
| 1.8 MPa, annealed, 12.7mm, molded | 97.2 | °C | ASTM D648 |
| 1.8 MPa, annealed, 12.7mm | 90.6 | °C | ASTM D648 |
| Vicat Softening Temperature | 104 | °C | ASTM D1525 1 |
| CLTE - Flow | 9.2E-5 | cm/cm/°C | ASTM D696 |
| RTI Elec (1.57 mm) | 60.0 | °C | UL 746 |
| RTI Imp (1.57 mm) | 60.0 | °C | UL 746 |
| RTI (1.57 mm) | 60.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| A | 82.2 - 87.8 | °C | |
| B | 71.1 - 76.7 | °C | |
| Drying Time | |||
| A | 2.0 | hr | |
| B | 4.0 | hr | |
| Suggested Max Moisture | < 0.10 | % | |
| Suggested Shot Size | 50 - 70 | % | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 235 - 252 | °C | |
| Middle Temperature | 241 - 254 | °C | |
| Front Temperature | 246 - 260 | °C | |
| Nozzle Temperature | 246 - 260 | °C | |
| Processing (Melt) Temp | 246 - 266 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C | |
| Injection Pressure | 68.9 - 110 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.00 - 0.172 | MPa | |
| Clamp Tonnage | 2.8 - 5.5 | kN/cm² | |
| Cushion | < 6.35 | mm |
| Injection instructions |
|---|
| Hold Pressure: 50 to 75% of Injection PressureScrew Speed: Moderate |
| Note Message | |
|---|---|
| 1 . | 标准 B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MORETEC™ 1018CN | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| Chemlon® 214 GH | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
| EZPrene 9090A | ENPLAST Americas, a Ravago Group Company | TPV | EZPrene |
| Lucent TPO TPO-10T | Lucent Polymers, Inc. | Polyolefin, Unspecified | Lucent TPO |
| MAJORIS DT422 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
