Order Products : sales@su-jiao.com
CABELEC® CA4676
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Cabot Corporation |
| Trademark: | CABELEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4TglmK_CABELECCA4676.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CABELEC CA4676 electrically conductive compound is based on conductive carbon black dispersed in a modified low density polyethylene resin. its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. Applications CABELEC CA4676 conductive compound has been specially designed for packaging and product handling applications where freedom from the hazard of electrostatic discharge is necessary. examples of use are in handling of explosive powders, pigments and electronic components and it is particularly suitable for foam applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.990 | g/cm³ | Internal method |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/10.0 kg | 4.8 | g/10 min | ISO 1133 |
| 190°C/21.6 kg | 29 | g/10 min | ISO 1133 |
| 190°C/5.0 kg | 0.90 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, 3.00mm | 11.0 | MPa | ISO 527-2 |
| Fracture, 3.00mm | 13.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 3.00 mm) | 390 | % | ISO 527-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity (0.100 mm) | 2.5E+4 | ohms | Internal method |
| Volume Resistivity (4.00 mm) | 10 | ohms·cm | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 120 - 160 | °C | |
| Cylinder Zone 3 Temp. | 120 - 160 | °C | |
| Cylinder Zone 5 Temp. | 120 - 160 | °C | |
| Melt Temperature | < 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ferro PP TPP20AT08NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| Epocast 1617 A/B | Huntsman Advanced Materials | Epoxy | Epocast |
| Escorene™ Ultra UL 00226CC | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| Karina CLEAR PVC COMPOUND 90/209-ATB | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Plaslube® AC-81/TF/15 | Techmer Engineered Solutions | Acetal (POM) Homopolymer | Plaslube® |
