Order Products : sales@su-jiao.com

ESENTTIA 08C01T

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4TPVrP_ESENTTIA-08C01T.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Characteristics: Control reologhy Impact Block Copolymer polypropylene; high impact/stiffness balance; excellent thermal stability. Recommended for: Injection molding of batteries cases, automotive parts, housewares; injection molding general purpose applications.

General Information
Features	Block Copolymer Controlled Rheology Food Contact Acceptable General Purpose Good Thermal Stability
Uses	Automotive Applications Battery Cases General Purpose Household Goods
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	7.5	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	24.8	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	7.8	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1240	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	120	J/m	ASTM D256A
Gardner Impact ⁵(-30°C, 3.20 mm, Injection Molded)	28.2	J	ASTM D5420

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min
5 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Rynite® GW520CS NC010	DuPont Performance Polymers	PET	Rynite®
ACCUTECH™ HP0339C20L	ACLO Compounders Inc.	PP Homopolymer	ACCUTECH™
CoolPoly® E3607	Celanese Corporation	Nylon 66/6	CoolPoly®
Dapol® D2200F	Fudow Co., Ltd.	DAP	Dapol®
POCAN® S 1506 000000	LANXESS GmbH	PBT	POCAN®