Europrene® N 2830 GRN

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4ROALC_Europrene-N-2830-GRN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 2830 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 2830 GRN is characterised by a low Mooney Viscosity that allows an excellent processability mostly in injection moulding applications. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Automotive and industrial seals, textile industry articles, oil industry holds, stoppers, stamps, dampers.

Message

Europrene® N 2830 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 2830 GRN is characterised by a low Mooney Viscosity that allows an excellent processability mostly in injection moulding applications. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

Automotive and industrial seals, textile industry articles, oil industry holds, stoppers, stamps, dampers.

General Information
Additive	Antioxidant
Features	Antioxidant Fast Cure Fuel Resistant Good Processability Low Temperature Flexibility Low Viscosity Oil Resistant
Uses	Automotive Applications Closures Industrial Applications Oil/Gas Applications Seals Textile Applications
Appearance	Yellow
Forms	Bale
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	30	MU	ASTM D1646
Acrylonitrile Content	28.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 0.70	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
RTP 1399 X 127527 A	RTP Company	PPS	RTP
GAPEX® RPP20EU77AL	Ferro Corporation	PP, Unspecified	GAPEX®
Grilamid® TR 90 TL	EMS-GRIVORY	Nylon 12	Grilamid®
KRYSTALFLEX™ PE409	Huntsman Corporation	PUR-Eth,aliphat	KRYSTALFLEX™
Jampilen HP500M	Jam Polypropylene Company	PP Homopolymer	Jampilen