Order Products : sales@su-jiao.com
Andur 6500 DPLF/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4PvFUU_Andur-6500-DPLF-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 6500 DPLF is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer containing 0.1% or less TDI monomer. An elastomer with a hardness of 65 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.2 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 25.5 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 34.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 280 | % | ASTM D412 |
| Bayshore Resilience | 60 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 3.0 | min | |
| Demold Time (100°C) | 20 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 64 to 67Die C Tear, ASTM D1004: 550 pliAverage Split Tear, ASTM D1938: 160 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 6500 DPLF: 150-170°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® BGF20 BK 45 | Ravago Group | Nylon 6 | Ravamid® |
| Ultramid® HFX 35 | BASF Corporation | Nylon 6 | Ultramid® |
| AFLAS® 150C | Asahi Glass Co., Ltd. | Fluorelastomer | AFLAS® |
| Ekatal® H 3 | Sattler KunststoffWerk GmbH | Acetal (POM) Copolymer | Ekatal® |
| Generic PEI - Carbon Fiber | Generic | PEI | Generic |
