Order Products : sales@su-jiao.com

Keliren® CPE132C

Category:	CPE , Chlorinated Polyethylene
Manufacturer:	Hangzhou Keli Chemical Co., Ltd.
Trademark:	Keliren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4P9CsN_Keliren-CPE132C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound. Application: FR-ABS, Flexible PVC Performance: Excellent processing flowability and minimal residual crystal.

Message

Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound.

Application: FR-ABS, Flexible PVC

Performance: Excellent processing flowability and minimal residual crystal.

General Information
Features	Good Abrasion Resistance Good Chemical Resistance Good Impact Resistance Good Weather Resistance High Flow Low Temperature Resistant
Uses	Additive

Physical	Nominal Value	Unit	Test Method
Chlorine Content	31.0 to 33.0	wt%	ISO 7725

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	< 60		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (Break)	> 8.00	MPa	ISO 37
Tensile Elongation (Break)	> 800	%	ISO 37

Resin Grade	Manufacturer	Category	Trademark
Rotec® ASA T 115/03	ROMIRA GmbH	ASA	Rotec® ASA
Deco-Coat™ UV Cure 7155™	Epoxies, Etc.	Epoxy	Deco-Coat™
Karina CLEAR PVC COMPOUND -E 85/209-D-AT-IS-SI	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
VisiJet® FTX Silver	3D Systems	Unspecified	VisiJet®
Sylvin 8980-90 White 1588	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin