Order Products : sales@su-jiao.com
ULTZEX™ 2080C
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | ULTZEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4NdDgD_ULTZEX-2080C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ULTZEX™ 2080C is a Linear Low Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Packaging. Primary characteristic: good sealability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 51 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 9.00 | MPa | |
| Break, Injection Molded | > 20.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | > 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 170 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 93.0 | °C | ISO 306 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESN Noir P210 TL | Arkema | Nylon 11 | Rilsan® |
| Matrixx TPP1B10 | The Matrixx Group, Inc. | PP, Unspecified | Matrixx |
| SLOVALEN® EH 96 N 003 | Plastcom | PE, Unspecified | SLOVALEN® |
| Axiall PVC 6300 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| CYCOLAC™ MG29 resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
