Order Products : sales@su-jiao.com
Formolene® E925
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4MpRkV_Formolene-E925.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
High Molecular Weight High Density Polyethylene (HMW-HDPE) for Film Extrusion Formolene® E925 is a bi-modal HMW-HDPE resin designed for high dart impact strength and good processing characteristics. Formolene® E925 is well balanced in overall physical properties and provides good stiffness for thin gauge film applications. Formolene® E925 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.050 | g/10 min | |
| 190°C/21.6 kg | 11 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 13 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 13 µm, Blown Film | 62.1 | MPa | |
| TD : Break, 13 µm, Blown Film | 28.3 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 13 µm, Blown Film | 300 | % | |
| TD : Break, 13 µm, Blown Film | 410 | % | |
| Elmendorf Tear Strength 1 | ASTM D1922 | ||
| MD : 12.7 µm | 3.9 | kN/m | |
| TD : 12.7 µm | 9.7 | kN/m |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dart Impact (12.7 µm) 2 | 77.2 | kN/m | ASTM D1709 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 131 | °C | DSC |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| 2 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMAPET® A1 | Indorama Ventures PCL | PET | RAMAPET® |
| YUNCON® CN90 | YunNan YunTianHua Co., Ltd. | Acetal (POM) Copolymer | YUNCON® |
| Flontech® FT-903-ST | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| KYOCERA KE-G240V | KYOCERA Chemical Corporation | Epoxy | KYOCERA |
| Karina CRYSTAL PVC COMPOUND 842-IS-SD | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
