Order Products : sales@su-jiao.com
Dynaprene® VE5073A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantex Industry Co., Ltd. |
| Trademark: | Dynaprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4LdaQf_Dynaprene-VE5073A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dynaprene VE5073A is an unreinforced TPE product for injection moulding in natural colour for Food and Drug Approval (FDA) applications |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 73 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 13 | % | ASTM D412 |
| Tensile Stress (100% Strain) | 2.89 | MPa | ASTM D412 |
| Tensile Strength - Across Flow (Yield) | 7.57 | MPa | ASTM D412 |
| Tensile Elongation - Across Flow (Break) | 460 | % | ASTM D412 |
| Tear Strength 1(23°C) | 33.3 | kN/m | ASTM D624 |
| Compression Set (100°C, 22 hr) | 37 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Mass (121°C, 24 hr, in IRM 903 Oil) | 77 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.750 mm) | HB | UL 94 |
| Additional Information |
|---|
| Moisture: 0.03% |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 280 | °C | |
| Middle Temperature | 180 - 280 | °C | |
| Front Temperature | 180 - 280 | °C | |
| Nozzle Temperature | 210 - 220 | °C | |
| Processing (Melt) Temp | 180 - 280 | °C | |
| Mold Temperature | 10.0 - 70.0 | °C | |
| Injection Pressure | 50.0 - 120 | MPa | |
| Holding Pressure | 30.0 - 80.0 | MPa | |
| Back Pressure | 0.00 - 0.300 | MPa | |
| Screw Speed | 60 - 120 | rpm |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| FLEXITEQ™ F87A110 | Marplex Australia Pty. Ltd. | TPV | FLEXITEQ™ |
| Geon™ Fiberloc™ 80510 | PolyOne Corporation | PVC, Rigid | Geon™ Fiberloc™ |
| Hylon® N1030HHR | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Sylvin 8925-80 NATURAL | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Sylvin 8707-84 White 1338 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
