Order Products : sales@su-jiao.com
Jam PE 15YF6
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4LLrgD_Jam-PE-15YF6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 15YF6 is a Linear Low Density Polyethylene product. It is available in Africa & Middle East. Typical application: Film. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 to 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.60 | g/10 min | ASTM D1238 |
| Flow Rate Ratio | 32.0 | ASTM D1238 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Fish Eye | 100 | No./m² | |
| Titanium | 3 | ppm |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm, Blown Film | 12.5 | MPa | |
| TD : Yield, 25 µm, Blown Film | 13.4 | MPa | |
| MD : Break, 25 µm, Blown Film | 33.0 | MPa | |
| TD : Break, 25 µm, Blown Film | 35.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 860 | % | |
| TD : Break, 25 µm, Blown Film | 700 | % | |
| Dart Drop Impact (25 µm, Blown Film) | 150 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, Blown Film | 510 | g | |
| TD : 25 µm, Blown Film | 170 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 45 | ASTM D1790 | |
| Haze (25.0 µm, Blown Film) | 18 | % | ASTM D1003 |
| Yellowness Index (0.0250 mm) | 0.0 | YI | ASTM D1925 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 GB 30 | RTP Company | PC | RTP |
| Sindustris PC GN1007FM | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Biocycle 18BC-1 | Biocycle | Biodeg Polymers | Biocycle |
| Hylon® N1050L | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| OTECH PVC OE6537 - Gasket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
