Lucolast® 7010AC

Category:	EBA , Ethylene Butyl Acrylate Copolymer
Manufacturer:	Lucobit AG
Trademark:	Lucolast®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4IlDYT_Lucolast7010AC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Lucolast® 7010AC is a polar copolymer consisting of ethylene and butyl acrylate with low crystallinity. Product properties Addition of Lucolast® 7010AC to bitumen increases the range its viscosity and broadens the range of plasticity. Depending on the proportion of Lucolast® 7010AC that was added the minimum value of the Fraass breaking point of Lucolast® 7010AC modified bitumen decreases and the ring and ball softening point increases. Penetration values decline accordingly. Ductility determined according to DIN EN 12591 decreas-es, however, the values ascertained for the so-called ductility at low temperatures are more favourable than those for standard bitumen with-out addition of Lucobit. Product advantages Compared with other standard binder Lucolast® 7010AC displays significant advantages in improving resistance to deformation. Rut formation test at high temperatures demonstrated that asphalt can bear a two- to three-fold load when modifying it with thermoplastics or altering binder viscosity by adding Lucolast® 7010AC. This does not impair the low-temperature performance of Lucolast® 7010AC, but rather improves it. Applications Even relatively small amounts of PmB based on Lucolast® 7010AC in asphalt mixtures improve: resistance to mechanical stress, in particular deformation and wear stability/rigidity and reduce the tendency to flow‚ when hot and under load low temperature flexibility ageing behaviour Examples for application: s-wearing courses to ZTV-Asphalt - StB poured asphalt, also on sloping surfaces (ramps) stone mastic asphalt special asphalt surfaces, e.g. porous asphalt thin bituminous wearing courses (hot laying)

Message

Lucolast® 7010AC is a polar copolymer consisting of ethylene and butyl acrylate with low crystallinity.

Product properties
Addition of Lucolast® 7010AC to bitumen increases the range its viscosity and broadens the range of plasticity. Depending on the proportion of Lucolast® 7010AC that was added the minimum value of the Fraass breaking point of Lucolast® 7010AC modified bitumen decreases and the ring and ball softening point increases. Penetration values decline accordingly. Ductility determined according to DIN EN 12591 decreas-es, however, the values ascertained for the so-called ductility at low temperatures are more favourable than those for standard bitumen with-out addition of Lucobit.

Product advantages
Compared with other standard binder Lucolast® 7010AC displays significant advantages in improving resistance to deformation. Rut formation test at high temperatures demonstrated that asphalt can bear a two- to three-fold load when modifying it with thermoplastics or altering binder viscosity by adding Lucolast® 7010AC. This does not impair the low-temperature performance of Lucolast® 7010AC, but rather improves it.

Applications
Even relatively small amounts of PmB based on Lucolast® 7010AC in asphalt mixtures improve:

resistance to mechanical stress, in particular deformation and wear

stability/rigidity and reduce the tendency to flow‚ when hot and under load

low temperature flexibility

ageing behaviour

Examples for application:

s-wearing courses to ZTV-Asphalt - StB

poured asphalt, also on sloping surfaces (ramps)

stone mastic asphalt

special asphalt surfaces, e.g. porous asphalt thin

bituminous wearing courses (hot laying)

General Information
Features	Flexibility at low temperatures Copolymer Environmental protection Good stability Medium hardness
Uses	Asphalt modification

Resin Grade	Manufacturer	Category	Trademark
RONFALIN® TRE35	A. Schulman Europe	ABS	RONFALIN®
King Pearl® F Series	Loyal Chemical	PS (EPS)	King Pearl®
Lusin® Clean G 320	Chem-Trend L.P.	Unspecified	Lusin®
Deltron 4340	Shanghai Lin Gen Rubber Materials Co., Ltd.	PPS	Deltron
Styropek® BFL 295	Styropek S.A. de C.V.	PS (EPS)	Styropek®