Order Products : sales@su-jiao.com
DynaChar™ 2435-TH
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaChar™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4H05px_DynaChar-2435-TH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flame Retardant TPU Features:
Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Flexural Modulus | 60.7 | MPa | ASTM D790 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.59 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 3.0 to 6.0 | hr | |
| Rear Temperature | 160 to 168 | °C | |
| Middle Temperature | 166 to 174 | °C | |
| Front Temperature | 168 to 174 | °C | |
| Nozzle Temperature | 168 to 174 | °C | |
| Processing (Melt) Temp | 168 to 174 | °C | |
| Mold Temperature | 10.0 to 37.8 | °C | |
| Injection Pressure | 68.9 to 138 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Clamp Tonnage | 4.1 to 6.9 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 8221-75M300 | ExxonMobil Chemical | TPV | Santoprene™ |
| Baydur® 742 IBS (41 pcf) | Covestro - PUR | PUR-MDI | Baydur® |
| BRALEN® FB 3-33 | Slovnaft Petrochemicals, s.r.o. | LDPE | BRALEN® |
| Amodel® FC-1140 | Solvay Specialty Polymers | PPA | Amodel® |
| Comai 663-3 BA | Comai Ltda | LLDPE | Comai |
