Order Products : sales@su-jiao.com
POLYCOMPO PE 2520F
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4BNe5z_POLYCOMPO-PE-2520F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 2520F is a Linear Low Density Polyethylene product. It can be processed by blown film or cast film and is available in Asia Pacific. Applications of POLYCOMPO PE 2520F include agricultural, film and packaging. Primary characteristic: good sealability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 2.4 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 56 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 11.0 | MPa | |
| Break, Injection Molded | 20.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | 440 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 220 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 108 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 122 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STARFLEX® P 7374 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | STARFLEX® |
| TECHLEN H7348 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| Hylex® P1325 L1 HB | Entec Polymers | PC | Hylex® |
| PENTAMID AB GK30 H natur | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
| Riblene® FF 33 | Versalis S.p.A. | LDPE | Riblene® |
