Order Products : sales@su-jiao.com
INSULCAST® 961 FR
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | ITW Polymers Coatings North America |
| Trademark: | INSULCAST® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 49xO3e_INSULCAST-961-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| INSULCAST 961 FR is a low density flame retardant epoxy casting system. INSULCAST 961 FR finds use in airborne or light weight equipment where thermal insulation or a low dielectric constant is required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Absorption (24 hr) | 0.40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 27.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | < 5.0 | % | ASTM D638 |
| Flexural Strength | 29.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 4.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.17 | W/m/K | |
| Service Temperature 1 | 105 to 155 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+13 | ohms·cm | ASTM D257 |
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 3.70 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 0.020 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shelf Life (25°C) | 52 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | Black | ||
| Density | 0.599 to 0.748 | g/cm³ | |
| Viscosity | ASTM D2393 | ||
| -- 2 | 5.0 to 9.0 | Pa·s | |
| -- | 17 | Pa·s | |
| Curing Time | |||
| 25°C 3 | 2.0 to 3.0 | hr | |
| 100°C 4 | 3.0 | hr | |
| 75°C 5 | 16 to 20 | hr | |
| 25°C 6 | 24 | hr | |
| 25°C 7 | 24 | hr |
| Note Message | |
|---|---|
| 1 . | Depends on INSULCURE |
| 2 . | Mixed |
| 3 . | INSULCURE 13 |
| 4 . | INSULCURE 11B |
| 5 . | INSULCURE 20 |
| 6 . | INSULCURE 9 |
| 7 . | INSULCURE 44 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 5197-92 Green 3145 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| XANTAR® G2F 23 R | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Ebalta MG 709-120 / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| ISOLOSS® HD | E-A-R Specialty Composites | TSU | ISOLOSS® |
| POLYFLON™ M-112 | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
